• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.18.2019.tde-23052019-090405
Document
Author
Full name
Alex Micael Dantas de Sousa
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2019
Supervisor
Committee
Debs, Mounir Khalil El (President)
Araújo, Daniel de Lima
Stucchi, Fernando Rebouças
Title in Portuguese
Contribuição à análise da resistência à força cortante em lajes de concreto estrutural sem armadura transversal
Keywords in Portuguese
Cargas parcialmente distribuídas próximas do apoio
Lajes de pontes
Lajes sem armadura transversal
Modelagem em elementos finitos
Resistência à força cortante
Abstract in Portuguese
A resistência à força cortante em lajes de pontes sem armadura transversal têm sido um aspecto preocupante nas verificações de estruturas de concreto estrutural construídas décadas passadas e está diretamente relacionado aos modelos de cálculo de resistência à força cortante e de largura colaborante empregados no caso de cargas parcialmente distribuídas próximas do apoio. Entretanto, não existem ainda estudos nacionais relacionados ao nível de acurácia e precisão das abordagens geralmente empregadas na prática de projetos de pontes no Brasil. Por esta razão, propõem-se apresentar uma contribuição às análises de resistência à força cortante em lajes de pontes com ênfase no modelo de cálculo da ABNT NBR 6118:2014. Para isto foram comparados os resultados experimentais e teóricos utilizando diferentes modelos de resistência à força cortante e uma base de dados construída a partir de 642 resultados experimentais. Posteriormente, alguns modelos experimentais foram explorados por meio de simulações numéricas em elementos finitos no intuito de avaliar o nível de aproximações desta abordagem e investigar a influência de parâmetros como mísulas na proximidade dos apoios. Dentre os principais resultados desta pesquisa destaca-se que o valor médio da relação entre a resistência à força cortante teórica e experimental Vexp/Vcal utilizando a ABNT NBR 6118:2014 variou de 2,145 a 1,140 conforme o modelo de largura colaborante utilizado. Enquanto isso, os modelos numéricos calibrados apresentaram relação Vexp/VMEF variando entre 0,95 e 1,01 e com coeficientes de variação menores que 15%. De maneira geral, identificou-se que os modelos de resistência à força cortante apresentam elevados níveis de dispersão entre resultados teóricos e experimentais no caso de lajes e faixas de laje e que os modelos mais usuais de definição da largura colaborante não são precisamente adequados para o caso de cargas parcialmente distribuídas próximas do apoio.
Title in English
Contribution to the analysis of shear strength in structural concrete slabs without transverse reinforcement
Keywords in English
Bridge slabs
Finite element modeling
Partially distributed loads close to the support
Shear force strength
Slabs without transverse reinforcement
Abstract in English
The shear strength in bridge slabs without transverse reinforcement has been a matter of concern in structural concrete structures checks built in the past decades and is directly related to the shear force and effective width calculation models employed in the case of partially distributed loads close to the support. However, there are still no national studies related to the level of accuracy and precision of the approaches commonly used in the practice of bridge projects in Brazil. For this reason, it is proposed to contribute to the shear strength analyzes in bridge slabs with emphasis on the calculation model of ABNT NBR 6118: 2014. For this, we compared the experimental and theoretical results using different models of shear strength and a database constructed from 642 experimental results. Subsequently, some experimental models were explored by means of numerical simulations in finite elements in order to evaluate the level of approximations of this approach and to investigate the influence of parameters such as greater thickness close to the supports. Among the main results of this research, it is worth noting that the average value of the relationship between theoretical and experimental shear strength Vexp/Vcal using ABNT NBR 6118: 2014 varied from 2,145 to 1,140 according to the effective width model used. Meanwhile, the calibrated numerical models showed Vexp/VMEF ratio varying between 0.95 and 1.01 and with coefficients of variation lower than 15%. In general, it was identified that the shear strength models present high levels of dispersion between theoretical and experimental results in the case of slabs and slab strips and that the most usual models of defining the effective width are not precisely adequate for the partially distributed loads close to the support in slabs.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2019-06-11
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.