• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.18.2014.tde-01092014-093447
Document
Author
Full name
José Alencastro de Araujo
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2014
Supervisor
Committee
Schalch, Valdir (President)
Ferreira, José Roberto
Licco, Eduardo Antonio
Moraes, Clauciana Schmidt Bueno de
Reis, Lúcia Vidor de Sousa
Title in Portuguese
Reciclagem de pó de forno elétrico a arco para a produção de Aglomerado Pré-Fundido (APF) para uso em processo siderúrgico
Keywords in Portuguese
Aglomerado pré-fundido
Pó de forno elétrico a arco
Reciclagem
Resíduo sólido perigoso
Sinterização
Abstract in Portuguese
O pó de forno elétrico a arco (FEA) é gerado durante a fusão de sucata ferrosa nos fornos elétricos a arco e coletado predominantemente através de filtros de mangas. Esta substância é listada como resíduo sólido perigoso de fonte específica, K061, conforme a Norma ABNT NBR 10004:2004. As maiores empresas siderúrgicas semi-integradas do mundo têm adotado para o tratamento de pó de FEA, fundamentalmente três rotas: a recuperação de zinco e chumbo, através de dois processos complementares, um piro-metalúrgico, o Wäelz kiln e outro hidro-metalúrgico, o processo de dupla lixiviação Óxido de Wäelz; a inertização através da blendagem com a cal, aditivos e água, de forma a alcançar o pH da mistura >11, o que garante que metais pesados como o chumbo, cádmio e o zinco, presentes no pó de forno elétrico, não possam se tornar solúveis, evitando consequentemente, a sua lixiviação e a disposição em aterros industriais de resíduos sólidos perigosos. Sob a perspectiva da sustentabilidade, deve ser considerada a rota da recuperação de zinco e chumbo, que para ser viável necessita reunir a geração de pó de FEA de varias plantas, o que para um país com dimensões continentais pode ser um fator de insucesso. Esse trabalho trata da reciclagem do pó de FEA através do processo de sinterização de um compósito constituído de pó de FEA aglomerado com coque, carepa e fluorita cerâmica em pelotas, aplicável a uma planta unitária. Como resultado deste processo foram obtidos dois coprodutos, o aglomerado pré-fundido, APF, com teor de óxido de ferro superior a 70%, objeto do processo de sinterização e o concentrado de zinco, com teor de óxido de zinco maior que 50%, resultante da volatilização deste metal durante o processo de sinterização e coletado através de filtro de mangas. Complementarmente foi extraído aproximadamente 90% dos óxidos de chumbo e cádmio contidos no pó de FEA inicial. A produção do APF ocorreu em escala experimental dividida em três fases, a primeira fase foi efetuada com oito formulações distintas e comprovou através de análises químicas de espectrometria por fluorescência de raios X e difratometria de raios X, a viabilidade técnica da utilização somente de resíduos sólidos industriais para fabricação do APF. A segunda fase, também com oito formulações, definidas conforme planejamento de experimentos com delineamento fatorial, teve como objetivo identificar os principais efeitos das interações entre os componentes do APF, para obtenção da mistura com formulação ótima. A terceira fase testou a intensidade das variáveis, coque e fluorita cerâmica, para a extração do zinco. As duas primeiras fases dos testes de produção em escala experimental foram realizadas em uma planta piloto de sinterização de fluxo descendente e a terceira fase em uma planta piloto de fluxo ascendente, ambas instaladas na usina ArcelorMittal Piracicaba. O APF, com a formulação ótima, foi produzido em escala industrial na planta de sinterização Metalflexi, também instalada na usina ArcelorMittal Piracicaba, e testado em alto-forno de pequeno porte. O concentrado de zinco foi caracterizado quimicamente para se avaliar o uso em segmentos industriais que utilizem este elemento.
Title in English
Recycling of electric arc furnace dust for the production of agglomerated Pre-Cast Agglomerated (PCA) for use in steel making process
Keywords in English
Electric arc furnace dust
Hazardous waste
Pre-cast agglomerated
Recycling
Sintering
Abstract in English
The electric arc furnace (EAF) dust is generated during melting of steel scrap in electric arc furnaces and collected mainly through bag filters. The EAF dust is listed as hazardous waste from specific source, K061, according to ABNT 10004:2004. The major semi-integrated steel companies in the world have adopted for the treatment of EAF dust, basically three routes: the recovery of zinc and lead, through two complementary processes, a pyro-metallurgy, Waelz kiln and other hydro-metallurgical the leaching process of double oxide Waelz; the blanketing by blending with lime, water and additives in order to achieve the pH of the mixture>11, which ensures that heavy metals like lead, cadmium and zinc, present in furnace residue, can not become soluble, thereby avoiding the leaching and disposal in landfills of hazardous waste. This work suggests recycling of the EAF dust by sintering of a composite consisting of EAF dust agglomerate to coke particles (carbon source), mill scale (iron source) and ceramic fluorite (adictive agent used like fluxant) into pellets, a process known as sintering. As a result of the process is expected to obtain two by-products, the pre-cast agglomerated, PCA, with iron oxide content exceeding 70%, object of the process of sintering and zinc dust, containing more than 50% zinc oxide resulting from volatilization of this metal during the sintering process and collected by bag filter. Addition is expected to extract approximately 90% of lead and cadmium oxide contained in the initial EAF dust. The production of the PCA occurred in experimental scale divided into three stages, the first stage was performed with eight different formulations and checked by chemical analysis by X-ray fluorescence spectrometer and X-ray diffraction, the technical viability of using only solid waste industrial manufacturing PCA. The second phase, also with eight formulations, defined as planning experiments with factorial design, was tested the main effects and the double and triple interactions between the components of the PCA, to obtain the optimal formulation. The third phase was checked the intensity of the variables, coke fluorite ceramics, for removing zinc of PCA. The first two stages of the production tests were carried out on a pilot scale in a pilot plant sintering downstream and the third phase in a pilot plant xii upstream, both installed in the plant ArcelorMittal Piracicaba. The PCA, with the optimal formulation was produced on an industrial scale in the sinter plant Metalflexi also installed at the plant ArcelorMittal Piracicaba, and tested in small blast furnace. The zinc dust was characterized chemically for application in industries that use this element.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
alencastro.pdf (12.59 Mbytes)
Publishing Date
2014-09-02
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.