• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.18.2019.tde-04092019-125437
Document
Author
Full name
Luís Hilário Tobler Garcia
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2016
Supervisor
Committee
Carvalho, Jonas de (President)
Barbosa, Gustavo Franco
Chinelatto, Marcelo Aparecido
Duduch, Jaime Gilberto
Moreno, Mariano Eduardo
Title in Portuguese
Desenvolvimento de processo de fabricação de compósitos de fibras longas através da tecnologia de manufatura aditiva
Keywords in Portuguese
compósitos
impressão 3d
manufatura aditiva
polímeros reforçados
Abstract in Portuguese
O trabalho trata do desenvolvimento de processo de fabricação de compósitos de fibras longas através da tecnologia de manufatura aditiva, possibilitando a criação de peças com maior resistência mecânica através da combinação adequada de materiais com diferentes propriedades mecânicas. Os processos de manufatura aditiva consistem na obtenção de um objeto sólido a partir de um modelo digital de três dimensões, através do fatiamento deste modelo e da adição sequencial de material com o objetivo de criar suas respectivas camadas, permitindo a reprodução real do modelo digital escolhido. Um compósito é a combinação de materiais com diferentes propriedades para a obtenção de um novo material com características específicas, permitindo a criação de melhores arranjos de propriedades através da escolha adequada dos materiais a serem combinados. Os materiais que formam um compósito podem ser divididos em matriz e reforço, entre os quais, os materiais de reforço são responsáveis por suportar os carregamentos transmitidos pela matriz. O uso de materiais poliméricos reforçados resulta em um material com baixo peso e elevada resistência mecânica. A adição de fibras longas nos processos de manufatura aditiva é foco do estudo, no qual foi utilizada a tecnologia Fused Deposition Modeling devido à sua simplicidade e facilidade de acesso a equipamentos de baixo custo para fins de validação de conceito. Foi desenvolvido e construído um cabeçote de deposição contínua de fibras longas, adequado ao uso no processo de deposição por camadas, através do qual foram manufaturados corpos de prova, que foram ensaiados mecanicamente conduzindo a resultados satisfatórios, validando a técnica e indicando que a fabricação de polímeros reforçados através da tecnologia de manufatura aditiva é um processo promissor.
Title in English
Development of composites manufacturing process through additive manufacturing process technology
Keywords in English
3D printing
additive manufacturing
composites
reinforced polymers
Abstract in English
The work deals with the development of long fiber composite manufacturing process through additive manufacturing technology, enabling the creation of parts with higher mechanical strength through proper combination of materials with different mechanical properties. Additive manufacturing processes consist in obtaining a solid object from a three dimension digital model through the slicing of the model and the sequential addition of material layer by layer allowing the real reproduction of the digital model. A composite is a combination of materials with different properties to obtain a new material having specific characteristics, allowing the creation of the best arrangement of properties through the choice of materials to be combined. The materials that form a composite can be divided into matrix and reinforcement, where the reinforcing materials are responsible for supporting the loads transmitted by the matrix. The use of reinforced polymeric materials results in a material with low weight and high mechanical strength. The addition of long fibers in the additive manufacturing process is the focus of this study, where the Fused Deposition Modeling process was used due to its simplicity and facility to access low-cost equipment in order to validate the concept. The system developed was used to manufacture specimens which have been mechanically tested leading to satisfactory results, indicating a very promising process for the production of reinforced polymers by additive manufacturing technology.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2019-09-09
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.