• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.18.2018.tde-14052024-084120
Document
Author
Full name
Marlon Mauricio Hernandez Cely
Institute/School/College
Knowledge Area
Date of Defense
Published
São Carlos, 2018
Supervisor
Committee
Rodriguez, Oscar Mauricio Hernandez (President)
Aguiar, Fernando Guimarães
Correa, Nivaldo Aparecido
Franklin, Erick de Moraes
Seleghim Junior, Paulo
Title in Portuguese
Tratamento e análise de dados obtidos através de velocimetria por imagens de partículas e sensor de impedância elétrica de malha de fios para estudo de escoamento bifásico em dutos de geometria anular
Keywords in Portuguese
duto anular
escoamento bifásico
escoamento gás-líquido
padrão pistonado
perfis de velocidade
sensor wíre-mesh
Abstract in Portuguese
A presença frequente de escoamentos bifásicos em diversos processos naturais e industriais tem motivado um grande interesse acadêmico nas últimas décadas. O caso particular do escoamento gás-líquido é geralmente encontrado na indústria do petróleo, onde pode apresentar-se em diferentes padrões de escoamento. Entretanto, há relativamente poucos dados disponíveis sobre escoamento gás-líquido em dutos de seção anular de grande porte. Para o estudo dos fenômenos físicos associados ao escoamento bifásico são necessários instrumentos de medição variados. Técnicas não intrusivas, como a velocimetria por imagem de partícula (PIV), permitem a aquisição de velocidades instantâneas nos escoamentos. Com base nas velocidades locais instantâneas, funções de densidade de probabilidade, velocidades médias, flutuações das velocidades e tensões de cisalhamento de Reynolds são calculadas. Outra técnica, intrusiva e de visualização tomográfica, é o sensor de impedância elétrica de malha de fios, que é capaz de produzir imagens do escoamento com alta resolução temporal e boa resolução espacial. Foi desenvolvida uma nova versão desse sensor, aqui denominado sensor wire-mesh anular (AWMS). Foi feita a sincronização do AWMS com o PIV e com uma câmera de alta velocidade para obtenção de informações detalhadas de escoamentos bifásicos em dutos de geometria anular. Foram obtidos e analisados dados de velocidade, tamanho e frequência de passagem das bolhas em escoamento pistonado, além de perfis de velocidade e características da turbulência em diferentes posições abaixo da bolha e no pistão. Tomografias das seções transversal e lateral do escoamento ar-água no padrão de escoamento pistonado foram tomadas e analisadas. A velocidade média da bolha foi calculada usando gravação de imagens em vídeo de alta velocidade, que foi comparada com os dados de velocidade obtidos por PIV
Title in English
Treatment and analysis of data obtained through particle image velocimetry and wire-mesh sensor for the study of two-phase flow in a duct of annular geometry
Keywords in English
annular duct
gas-liquid flow
slug flow
two-phase flow
velocity profiles
wire-mesh sensor
Abstract in English
The frequent presence of two-phase flows in natural and industrial processes has motivated a great academic interest in recent decades. The particular case of oil-gas flow is usually found in the petroleum industry, where it can be observed in different flow patterns. However, there is a lack of data about gas-liquid flow in big ducts of annular geometry. In order to study the physical phenomena in two-phase flow several advanced measuring instruments are required. Non-intrusive techniques such as Particle Image Velocimetry (PIV) allow the determination of instantaneous velocity fields in flows. Based on instantaneous local velocities, probability density functions, mean velocities, velocity fluctuations and Reynolds shear stress are calculated. Another intrusive and tomographic visualization technique is the wire-mesh sensor, which is able to produce an image of the flow with high temporal resolution and good spatial resolution. A new version of it was developed in this work and it is called Annular Wire-Mesh Sensor (AWMS). The PIV, AWMS and a high speed video camera have been synchronized to obtain detailed two-phase flow information in ducts of annular geometry. Data of bubble velocity, length and frequency in slug flow, and also velocity profiles and turbulence characteristics at different position below the bubble and in the liquid slug, have been acquired an analyzed. Tomography of the cross-sectional and lateral sections of the two-phase air-water flow in the slug-flow pattern were taken and analyzed. The average velocity of the bubble was calculated using high-speed video recording, which was compared with the speed data obtained by PIV
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2024-05-14
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.