• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Doctoral Thesis
DOI
https://doi.org/10.11606/T.3.2018.tde-05032018-150830
Document
Author
Full name
Katia Maria Hipolito Hespanhol
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
São Paulo, 2017
Supervisor
Committee
Ferreira Filho, Sidney Seckler (President)
Daniel, Luiz Antonio
Mancuso, Pedro Caetano Sanches
Moruzzi, Rodrigo Braga
Piveli, Roque Passos
Title in Portuguese
Cinética de floculação de suspensões coloidais: influência da dosagem de coagulante metálico e da concentração de partículas primárias nas constantes de agregação e ruptura.
Keywords in Portuguese
Cinética
Floculação
Tratamento de água
Abstract in Portuguese
A floculação é o principal estágio do tratamento da água e apesar dos significativos avanços alcançados nos últimos anos, a compreensão do mecanismo de floculação está longe de ser completa. O objetivo principal do presente trabalho foi investigar a cinética de floculação de suspensões coloidais, através da influência da dosagem de coagulante metálico e da concentração de partículas primárias nas constantes de agregação e ruptura, utilizando o modelo de Argaman e Kaufman para a cinética de floculação de um reator em batelada. A água bruta sintética foi feita com a adição de caolinita, de tal forma a obter os valores de turbidez prédeterminados de 15 UNT, 50 UNT e 100 UNT, representando águas de baixa, média e alta turbidez, respectivamente, e o coagulante utilizado foi o sulfato de alumínio. Os resultados experimentais foram obtidos em ensaios de "jar test" utilizando 6 dosagens de coagulantes, 6 gradientes de velocidade, 3 velocidades de sedimentação e 12 tempos de floculação para cada uma das três águas analisadas. Pode-se observar que, para água de baixa e média turbidez, com o aumento da dosagem de coagulante houve um gradativo aumento da constante de agregação, no entanto, para água de alta turbidez, para valores de dosagem de coagulante acima de 40mg.L-1, passa a ocorrer uma redução na constante de agregação, e também houve um aumento da constante de ruptura para as três águas brutas utilizadas na investigação experimental. Para todas as dosagens de coagulante empregadas, com o aumento da turbidez da água bruta, houve uma diminuição significativa da constante de ruptura ocorrida na água bruta de baixa turbidez para a água bruta de média turbidez. Embora também tenha sido observada uma variação na constante de agregação, esta foi muito pequena quando comparada numericamente com as variações na constante de ruptura. Com o aumento da turbidez da água bruta de 50 UNT para 100 UNT, a variação da constante de ruptura ocorreu apenas de forma marginal, o que significa dizer que, embora esta seja função da turbidez da água bruta, a sua relação não deve ser simplesmente linear, conforme sugerido por Argaman e Kaufman.
Title in English
Kinetics of flocculation of colloidal suspensions: influence in metallic coagulant dosage and the concentration of primary particles in aggregation and rupture constants.
Keywords in English
Aggregation and rupture constants
Flocculation
Kinetic
Water treatment
Abstract in English
Flocculation is the main stage of water treatment and in spite of significant advances in recent years, understanding of the flocculation mechanism is far from complete. The main objective of current work was to investigate the kinetics of flocculation of colloidal suspensions, throughout the influence in metallic coagulant dosage and the concentration of primary particles in aggregation and rupture constants, using the Argaman and Kaufman model for kinetics of flocculation in a batch reactor. Synthetic raw water was made with the addition of kaolin, in order to obtain predetermined turbidity values of 15 NTU, 50 NTU and 100 NTU, representing waters of low, medium and high turbidity, respectively, and the coagulant applied was aluminum sulfate. Experimental results were obtained in "jar test" experiments using 6 coagulant dosages, 6 velocity gradients, 3 sedimentation velocity and 12 flocculation times for each water analyzed. It can be observed that, for waters of low and medium turbidity, with the coagulant dosage increase, takes place a gradual increase in aggregation constant, however, on waters of high turbidity, with coagulant dosages above 40mg.L-1, A reduction in aggregation constant occurs, and also there was seen an increase in rupture constant for the three raw waters used in the experimental investigation. For all employed coagulant dosages, with the increase in raw water turbidity, there were a significant decrease in rupture constant occurred in raw water of low turbidity to medium turbidity raw water. Although a variation in the aggregation constant was also observed, this was very small when numerically compared with the variation in rupture constant. With the increase in raw water turbidity from 50 NTU to 100 NTU, rupture constant variation occurred only in a marginal manner, meaning to say, while this is in function of raw water turbidity, its relation might not be simply linear, as suggested by Argaman and Kaufman.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
Publishing Date
2018-03-09
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.