• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.74.2015.tde-14052015-092222
Document
Author
Full name
Gabriela Feltre
E-mail
Institute/School/College
Knowledge Area
Date of Defense
Published
Pirassununga, 2015
Supervisor
Committee
Dacanal, Gustavo Cesar (President)
Carvalho, Livia Chaguri e
Blácido, Delia Rita Tapia
Sato, Ana Carla Kawazoe
Title in Portuguese
Estudo das alterações na microestrutura de partículas de amido de milho em processos de granulação
Keywords in Portuguese
Aglomeração
Amido de milho
Dripping
High shear
Leito fluidizado
Abstract in Portuguese
O amido de milho é uma importante fonte de energia para os seres humanos e é muito utilizado em preparos de diversos pratos. Os grânulos de amido possuem estrutura semicristalina que sofre degradação em elevadas temperaturas e com presença de água. Com o objetivo de alterar a microestrutura dos grânulos de amido de milho, principalmente quanto à sua temperatura de gelatinização, foram realizados processos de aglomeração de três diferentes métodos e avaliadas as modificações ocorridas. Todas as partículas produzidas passaram por análises de DSC, FT-IR, DRX e MEV. O trabalho foi divido em três diferentes estudos. No Estudo I, foi realizada a aglomeração do amido de milho com solução de alginato de sódio por "high shear" com posterior secagem em leito fluidizado. A partícula depois de seca teve 99,5% de amido em sua composição. Os resultados mostraram que houve aglomeração nos grânulos de amido de milho; porém, devido à baixa fração de alginato de sódio nas partículas, elas não apresentaram diferenças significativas quanto à sua temperatura de gelatinização, sua estrutura e suas ligações, quando comparadas ao amido nativo. No Estudo II, em que foi realizada a aglomeração dos grânulos de amido de milho com solução de alginato de sódio e cloreto de cálcio, por "dripping", foram obtidas partículas com frações de (0, 50, 60, 70, 80 e 90)% de amido. As modificações aconteceram à medida em que se aumentou a quantidade de alginato de sódio da partícula. As partículas com maiores frações de amido não apresentaram alterações significativas em sua microestrutura e temperatura de gelatinização, quando comparadas ao amido de milho nativo. As partículas com menores frações de amido, ou seja, maiores teores de alginato de sódio, apresentaram alterações em sua microestrutura e cristalinidade, além de maiores temperaturas de gelatinização. No Estudo III, foi realizada a aglomeração do amido de milho com quitosana por "dripping" em soluções de diferentes molaridades de de hidróxido de sódio (NaOH). Dentre as principais modificações observadas, destaca-se o aumento da temperatura de gelatinização, em partículas que foram precipitadas em soluções alcalinas de NaOH com molaridade de (0,10 e 0,12) M. Para as concentrações molares de (0,14, 0,16, 0,18 e 0,20) M, de NaOH, observou-se que parte dos grânulos de amido de milho foram solubilizados pela solução alcalina, e que as frações sólidas remanescentes apresentaram-se na forma de partículas precipitadas de amido-quitosana, com aparência transparente e amarelada. Os processos de aglomeração do amido de milho nativo pelos métodos "high shear" e "dripping", utilizando-se soluções de alginato de sódio e quitosana, podem resultar em partículas resistentes à gelatinização, devido à atribuição de uma barreira física por estes ligantes, após as etapas de secagem. O aumento da concentração de alginato resultou em um aumento da temperatura de gelatinização, produzindo partículas de amido resistentes à degradação térmica. Adicionalmente, observou-se que o uso de soluções alcalinas diluídas de NaOH, também permitiu a produção de partículas resistentes à degradação térmica, por meio da precipitação da quitosana. O método "dripping" permitiu a produção de partículas com elevadas concentração de alginato ou quitosana, e foi o método mais indicado para a produção de partículas de amido resistentes à degradação térmica. As partículas aglomeradas pelo método "high shear" tiveram concentração de ligante (alginato de sódio) limitada a 0,5%, e não resultaram em partículas resistentes à degradação térmica.
Title in English
Study of variations in the microstructure of corn starch particles in granulation processes
Keywords in English
Agglomeration
Corn starch
Dripping
Fluidized bed
High shear
Abstract in English
Corn Starch is an important source of energy for humans and is widely used in food preparations. Starch granules exhibit a semicrystalline structure which undergoes degradation at high temperatures and the presence of water. In order to change the microstructure in corn starch granules, especially regarding its gelatinization temperature, three diferente methods of agglomeration processes were performed and changes of starch particles were studied. Every produced particle were analysed by DSC, FT-IR, XRD and SEM. The work was divided into three different studies. In Study I, agglomeration of corn starch was carried out with sodium alginate solution by "high shear" with subsequent fluidized bed drying. The dry contained was 99,5% starch in its composition. The results showed that the cornstarch granules agglomerated; however, due to the low fraction of sodium alginate in the particles, they showed no significant differences in gelatinization temperature, its structure and interactions when compared to native starch. In Study II, was performed the agglomeration of corn starch granules with sodium alginate solution and calcium chloride by dripping method and particles obtained contained (0, 50, 60, 70, 80 and 90)% (w/w) of starch. Modifications occurred with increasing the amount of sodium alginate in the particle. Particles with higher starch fractions showed no significant changes in its microstructure and gelatinization temperature, compared to the native corn starch. Particles with lower starch fraction, and higher concentrations of sodium alginate, showed changes in their microstructure and crystallinity, and higher gelatinization temperatures. In Study III, the agglomeration of cornstarch with chitosan by dripping in sodium hydroxide (NaOH) solutions of different molarities was evaluated. Among the main changes increases on the gelatinization temperature of particles precipitated in alkaline NaOH solutions with molarity (0,10 and 0,12) M was observed. For the molar concentrations (0,14, 0,16, 0,18 and 0,20) M NaOH, it was observed that some of granules corn starch were solubilised by the alkaline solution and the remaining solid fraction presented the form of precipitated particles of starch-chitosan with transparent and yellowish appearance. The native corn starch agglomeration processes by the methods "high shear" and "dripping", using solutions of sodium alginate and chitosan, can result in particles resistant to gelatinization due to the formation of a physical barrier of these ligands, after drying steps. Increasing the alginate concentration resulted in increase in the gelatinization temperature of starch, resulting in particles resistant to thermal degradation. Additionally, it was observed that the use of dilute alkaline solutions of NaOH allowed the production of thermal degradation resistant particles through precipitation of chitosan. The "dripping" method enabled the production of particles with higher concentrations of alginate or chitosan, and was the most suitable method for the production of starch particles resistant to thermal degradation. The particles agglomerated by "high shear" had binder concentration (sodium alginate) limited to 0,5%, and didi not result in particles resistant to thermal degradation.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
ME5712494COR.pdf (5.50 Mbytes)
Publishing Date
2015-05-14
 
WARNING: The material described below relates to works resulting from this thesis or dissertation. The contents of these works are the author's responsibility.
  • FELTRE, G., et al. Métodos de Caracterização do Tamanho e Distribuição de Partículas de Iogurte Caprino Probiótico em Pó. In ENEMP 2013 - XXXVI Congresso Brasileiro de Sistemas Particulados, Maceió, AL, 2013. ENEMP 2013., 2013. Dispon?vel em: http://evento.ufal.br/enemp2013/.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.