• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Tesis Doctoral
DOI
https://doi.org/10.11606/T.76.2011.tde-23112011-104004
Documento
Autor
Nombre completo
Francisco Carlos Barbosa Maia
Dirección Electrónica
Instituto/Escuela/Facultad
Área de Conocimiento
Fecha de Defensa
Publicación
São Carlos, 2011
Director
Tribunal
Miranda, Paulo Barbeitas (Presidente)
Caldas, Marilia Junqueira
Itri, Rosangela
Li, Maximo Siu
Roman, Lucimara Stolz
Título en portugués
Estudo da interação interfacial entre polímeros semicondutores e metais ou surfactantes
Palabras clave en portugués
Espectroscopia vibracional
Interfaces metálicas
Óptica não linear
Polímeros semicondutores
Surfactantes
Resumen en portugués
Esta Tese aborda duas importantes vertentes de pesquisa em polímeros conjungados (PC), bastante relevantes na Eletrônica Orgânica (EO) e na área de Biossensores. Com respeito à EO, estudam-se as interfaces PC - metal (M) por meio da espectroscopia vibracional de Geração de Soma de Frequências, cuja sigla mais comum é SFG - derivada do seu nome inglês Sum Frequency Generation. Este problema é de grande importância porque na interface acontecem fenômenos essenciais para o funcionamento de dispositivos, como por exemplo a injeção e coleta de cargas. Deve-se ressaltar que poucos trabalhos na literatura investigam o problema da interface PC-M, e aqueles que o fazem, ou sondam interfaces diferentes daquelas de dispositivos reais, ou são estudos teóricos, com necessidade da comprovação experimental, ou ainda usam ferramentas sem especificidade a interfaces. Neste ponto, o estudo da interface PC-M feita nesta Tese apresenta como expressivo diferencial o uso da espectroscopia SFG às interfaces PC-M do tipo encontrado em dispositivos usuais da EO. A técnica SFG permite determinar o ordenamento molecular nas interfaces através da análise quantitativa das vibrações das duplas ligações dos PC, que é a região molecular ativa durante o funcionamento dos dispositivos da EO. Além disso, a simples análise qualitativa dos espectros SFG indica a ocorrência de dopagem (transferência de carga) em algumas interfaces PC-M. Dentre as conclusões deste trabalho, destaca-se o entendimento de como a organização molecular da interface influencia a transferência de carga espontânea entre PC e M. Para tanto, construiu-se um modelo de ordenamento molecular (MOM) baseado nos resultados de SFG, que levando em conta o alinhamento energético (AE) entre os níveis de Fermi dos materiais na interface, estabelece a correlação entre arranjo molecular e transferência de carga. Para o estudo, escolheram-se os metais Al e Au, e os PCs comerciais poli(3-hexiltiofeno) (P3HT) regioregular e poli(9,9-dioctilfluoreno) (PF8), por serem comumente usados em dispositivos da EO. A combinação MOM-AE explica, por exemplo, a não ocorrência de dopagem nas interfaces P3HT-M. Neste caso, o MOM prevê o empacotamento π ao longo do plano da superfície metálica de modo que o contato PC-M estabelece-se através das cadeias alquila (isolantes) do P3HT. No caso de PF8-Au, verifica-se dopagem tipo p. Na interface PF8-Al, embora existam cadeias alinhadas à superfície metálica e com o plano dos anéis paralelo à mesma, favorecendo a transferência de carga, a igualdade das funções trabalho (AE) de cada material impede a dopagem. Também se verificaram diferenças quantitativas no ordenamento molecular do PC em função do método de preparação da amostra: i) PC depositado sobre substrato metálico ou ii) metal evaporado sobre filme do PC. De forma qualitativa, analisam-se copolímeros: poli(9,9-n-dihexil-2,7-fluorenodiilvinileno-alt-2,5 tiofeno) (L29) e iv) poli(9,9-di-hexilfluorenodiilvinileno-alt-1,4-fenilenovinileno) (L16), em interfaces com os mesmos metais. Neste caso, observa-se dopagem em todas as interfaces. O estudo inserido na área de Biosensores é motivado pela vasta gama de trabalhos que relatam o uso das propriedades ópticas (PO) de PEC como ferramenta sensora em sistemas biológicos, e sua modulação via interação com surfactantes. Foi então realizada a análise, por meio de técnicas de espectroscopia óptica convencional - Absorção Óptica (AO) e Fotoluminescência (PL) - e da técnica de Microcalorimetria Isotérmica por Titulação, da interação entre polieletrólitos conjugados (PEC) e surfactantes em solução aquosa. A formação do complexo PEC+surfactante ocorre mediante modificação do estado de agregação do polímero que, por sua vez, gera alterações em suas POs. Assim este estudo visa o entendimento de como as forças hidrofóbicas, eletrostáticas, fatores termodinâmicos e estrutura química de PECs e surfactantes influenciam as POs dos complexos formados. Pela primeira vez na literatura, relata-se a ocorrência de interação eletrônica entre PEC e surfactante. Isto acontece no caso do complexo formado pelo PEC aniônico, derivado do PPV, o poli [5 - metoxi 2 - (3 sulfopropoxi) - 1,4 fenilenovinileno] (MPSPPV), e o surfactante dodecilbenzeno sulfonato de sódio (DBS). A inédita interação eletrônica ocorre em solução, resultando em dramáticas modificações nos estados eletrônicos do MPSPPV devido à forte interação hidrofóbica com o DBS. Isto gera expressivos deslocamentos, em torno de 0,5 eV ou 100 nm, para a luminescência do complexo em relação à do MPSPPV puro. Isso torna o complexo MPSPPV+DBS bastante promissor, pois apresenta POs sintonizáveis, em função da concentração de surfactante. Para explicar as novas POs do complexo MPSPPV+DBS, propõe-se um modelo baseado na formação do complexo MPSPPV+DBS autoorganizado em um arranjo molecular específico. Neste arranjo, a proximidade entre os grupos conjugados de cada molécula leva ao realinhamento dos níveis energéticos, sob regime de forte acoplamento. A fim de estender e generalizar o trabalho, estudam-se surfactantes de diversas estruturas químicas ao constituírem complexos com o PEC aniônico (MPSPPV) e com o PEC catiônico, o poli [2,5 - bis ( 2 - (n, n -dietilamônio brometo) etoxi) - 1, 4 - alt - 1, 4 - fenileno] (DAB). Os surfactantes estudados são: dodecil sulfato de sódio (SDS), dodecilbenzeno sulfonato de sódio (DBS), t - octil - fenoxi - polietoxi - etanol (TX100) e dodeciltrimetil brometo de amônia (DTAB). Essas descobertas podem ter implicações importantes para o projeto de plataformas para aplicações em biosensores, e para a melhoria do desempenho e durabilidade de dispositivos de EO.
Título en inglés
Investigation of interfacial interaction between polymers and metal or surfactants
Palabras clave en inglés
Metallic interfaces
Non linear optics
Semiconducting polymers
Surfactants
Vibrational spectroscopy
Resumen en inglés
This Thesis addresses two important branches of the conjugated polymer (CP) research which are relevant to Organic Electronics (OE) and Biosensors. Concerning OE, the interfaces CP-metal (M) are studied by the Sum-Frequency Generation (SFG) vibrational spectroscopy. This problem is quite important since fundamental phenomena that are essential to the performance of organic devices take place at this interface, such as charge injection and collection. It should be stressed that few papers in the literature focus on the CP-M interface, and they either probe different interfaces from those present in the devices, or use analytical tools without specificity to the interfaces, or else they are theoretical studies requiring experimental verification. In this regard, the study of the CP-M interface accomplished in this Thesis shows the advantage over previous studies due to the use of SFG spectroscopy to the CP-M interfaces usually found in the organic devices. Furthermore, SFG spectroscopy allows a determination of the molecular arrangement at the interfaces by a quantitative analysis of the vibrations of the double bonds, which are the molecular regions directly involved in the operation of OE devices. Furthermore, a simple and qualitative analysis of the SFG spectra leads to the recognition of doping (charge transfer) in some CP-M interfaces. Among the most important conclusions, emerges the understanding of how the molecular order affects the spontaneous charge transfer between PC and M at the interface. This was attained through a molecular order model (MOM) based on the SFG results and on the energy alignment (EA) between the Fermi levels of the PC and metal at the interface. For this study were used the metals Al and Au, and the commercial CPs regioregular poly(3-hexylthiofene) (P3HT) and poly(9,9-dioctylfluorene) (PF8), which are commonly used in OE. The MMO-EA combination explains that reason for not detecting doping in P3HT-M interfaces, where the MMO has suggested π-stacking along the surface plane, resulting in little interaction between CPs electrons with the metal. The p-doping is found in the PF8-Au interface. For the interface PF8-Al, although the MMO implies that the polymeric chains are aligned to the metallic surface with their aromatic rings parallel to the surface, which is favorable for charge transfer process, the equality between the work functions (EA) of the materials prevents doping. It has also been observed quantitative differences in chain orientation for samples prepared by different methods: i) CP film spread over metallic substrates and ii) metal evaporated onto CP films. In a qualitative way, the 2 copolymers - poly(9,9-n-dihexyl-2,7-fluorenediilvinylene-alt-2,5 thiophene) (L29) and poly(9,9-di-hexylfluorenediilvinylene-alt-1,4-fenilenevinylene) (L16) - were analyzed at interfaces with the same metals. In all these cases, doping is observed. The study related to Biosensors is motivated by the large number of paper reporting the use of optical properties (OP) of CPE as a sensing tool in biological systems, and their modulation via interaction with surfactants. Therefore, an investigation of the interaction between conjugated polyelectrolytes (CPE) and surfactants in aquous solution was performed by convencional optical spectroscopy - Optical Absorbance (OA) and Photoluminescence (PL) - and the thermodynamic technique named Isothermal Titration Microcalometry. The formation of the CPE+surfactant complex is followed by modifications in the aggregation state of the polymer, which in turn generates modifications on its OPs. Therefore, this study aims the understanding of how hydrophobic and/or electrostatic forces, thermodynamic factors and chemical structure of the CPE and surfactants affect the OPs of the complexes. For the first time in the literature related to PEC+surfactant complexes, electrocnic interaction is noticed when the an anionic PPV derivative, poly [5 - metoxy 2 (3 sulfopropoxi) 1,4 fenilenovinileno] (MPSPPV), interacts with the surfactant Sodium dodecylbenzene sulfatonate (DBS). The striking electronic interaction occours in aqueous solution and dramatic modifications takes place in the electronic states of MPSPPV due to its strong hydrophobic interaction with DBS. The PL of complex MPSPPV+DBS presents a remarkable blue-shift of about 0,5 eV (or 100 nm), when compared to the PL of MPSPPV. Consequently, the MPSPPV+DBS has tunable OPs, within a wide range of the visible spectrum, as a function of the surfactant concentration. In order to explain these changes of OPs, is proposed a model based on the formation of a self-organized MPSPPV+DBS complex with a specific molecular arrangement. In this hybrid aggregate, the small distance between the conjugated groups of each molecule leads to a realignment of the energy levels. The complete study, however, investigated the complexes formed with the surfactants: Sodium dodecyl sulfate (SDS), Sodium dodecylbenzene sulfatonate (DBS), t - octyl - phenoxy - polyethoxy - ethanol (TX100) and dodecyltrimethyl Ammonium Bromide (DTAB), in interaction with both the anionic PEC (MPSPPV) and the cationic poly [2,5 - bys ( 2 - (n, n -diethylammonium bromide) ethoxy) - 1, 4 - alt - 1, 4 - fenylene] (DAB). These discoveries are expected to have important implications to the design of platforms for biosensor applications, and to the improvement of performance and durability of OE devices.
 
ADVERTENCIA - La consulta de este documento queda condicionada a la aceptación de las siguientes condiciones de uso:
Este documento es únicamente para usos privados enmarcados en actividades de investigación y docencia. No se autoriza su reproducción con finalidades de lucro. Esta reserva de derechos afecta tanto los datos del documento como a sus contenidos. En la utilización o cita de partes del documento es obligado indicar el nombre de la persona autora.
Fecha de Publicación
2011-11-25
 
ADVERTENCIA: El material descrito abajo se refiere a los trabajos derivados de esta tesis o disertación. El contenido de estos documentos es responsabilidad del autor de la tesis o disertación.
  • Amim Jr., Jorge, et al. FILMES ULTRAFINOS DE ÉSTERES DE CELULOSE: PREPARO, CARACTERIZAÇÃO E IMOBILIZAÇÃO DE PROTEÍNAS. Química Nova , 2010, vol. 33, p. 2064-2069.
  • Amim Jr., Jorge, et al. Stability and interface properties of thin cellulose ester films adsorbed from acetone and ethyl acetate solutions [doi:10.1016/j.jcis.2008.12.057]. Journal of Colloid and Interface Science [online], 2009, vol. 332, p. 477-483.
  • Amim, Jorge, et al. Solution behavior and surface properties of carboxymethylcellulose acetate butyrate [doi:10.1007/s10570-009-9295-z]. Cellulose (London) [online], 2009, vol. 16, p. 773-782.
  • Amim, Jorge, et al. Structural aspects of polyanion and hydrophobically modified polycation multilayers on hydrophilic or hydrophobic surfaces [doi:10.1039/c2sm25658d]. Soft Matter [online], 2012, vol. 8, p. 2462-6470.
  • MAIA, Francisco Carlos Barbosa, et al. Metal/conjugated polymer interface probed by SFG spectroscopy. In VII Encontro da SBPMat, Guarujá, 2008. CD de resumos do VII Encontro da SBPMat., 2008. Resumo.
  • MAIA, Francisco Carlos Barbosa, et al. Metallic contacts to conjugated polymers probed by SFG spectroscopy. In International Conference on Science and Technology of Synthetic Metals, Porto de Galinhas, Brazil, 2008. Book of Abstracts of the International Conference on Science and Technology of Synthetic Metals., 2008. Resumo.
  • MAIA, Francisco Carlos Barbosa, ZUCOLOTTO, Valtencir, and Miranda, Paulo B. The interaction between conjugated polyelectrolytes and aromatic surfactants in solution. In International conference on science and technology of synthetic metals, Porto de Galinhas, Brazil, 2008. Book of Abstracts of the International conference on science and technology of synthetic metals., 2008. Resumo.
Todos los derechos de la tesis/disertación pertenecen a los autores
CeTI-SC/STI
Biblioteca Digital de Tesis y Disertaciones de la USP. Copyright © 2001-2024. Todos los derechos reservados.