• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Mémoire de Maîtrise
DOI
https://doi.org/10.11606/D.97.2011.tde-22082013-171944
Document
Auteur
Nom complet
Luciano Braga Alkmin
Adresse Mail
Unité de l'USP
Domain de Connaissance
Date de Soutenance
Editeur
Lorena, 2011
Directeur
Jury
Nunes, Carlos Angelo (Président)
Rodrigues, Geovani
Santos, Claudinei dos
Titre en portugais
Desenvolvimento de ligas à base de Ni-Cr para prótese dentária
Mots-clés en portugais
Caracterização mecânica
Caracterização microestrutural
Corrosão
Ligas Ni-Cr
Próteses dentárias
Resumé en portugais
O presente trabalho visou desenvolver ligas à base de Níquel-Cromo para prótese dentária, que confiram as melhores características metalúrgicas e químicas para posterior produção e aplicação. Para isto foram adquiridas amostras de ligas comerciais de 8 fabricantes. Os materiais foram caracterizados em termos de composição química, propriedades mecânicas, caracterização microestrutural, temperatura de fusão, coeficiente de expansão térmica, corrosão e biocompatibilidade. Para isto, utilizou-se as fluorescência de raios X (XRF-WDS), ICP-OES, ensaios de tração, ensaios de dureza, ensaios de corrosão, avaliação de citotoxicidade, microscopia eletrônica de varredura (MEV), microanálise eletrônica (EDS), difratometria de Raios X (DRX), análise térmica diferencial (DTA), dilatometria e avaliação de fluidez. A maioria dos resultados composicionais não condiz com as composições fornecidas pelos fabricantes. Os resultados mostraram claramente a presença de um eutético típico formado pelas fases Niss e NiBe nas ligas contendo Be, que pode ser considerado uma "impressão digital" da presença deste elemento nestas ligas. É possível verificar a formação de intermetálicos na região interdendritica para as ligas isentas de Be, sendo identificado um siliceto (Nb6Ni16Si7) em uma das ligas, que possui temperatura de inicio de fusão inferior ao eutético Niss e NiBe das ligas com Be. De uma forma geral, os resultados dos ensaios de dureza mostraram valores superiores de dureza para as ligas com Be. Foi escolhida uma das ligas comerciais para a reprodução em escala laboratorial (LAB) e industrial (IND). Estas ligas produzidas apresentaram as mesmas características microestruturais, químicas e físicas da liga comercial. Nos ensaios de fluidez, a liga LAB apresentou o mesmo comportamento da liga comercial. A liga IND apresentou limite de escoamento e módulo de elasticidade de ?e0,02%= 810MPa e E= 200 GPa, respectivamente. Os ensaios de corrosão mostraram comportamento passivo tanto para a liga comercial quanto para a liga IND em saliva artificial e enxaguante bucal. O ensaio de citotoxicidade da liga IND indicou comportamento não citotóxico em controle negativo (Chapa de Ti). Os resultados obtidos com a liga IND indicam a possibilidade de fabricação desta liga Ni-Cr para próteses dentárias em escala industrial.
Titre en anglais
Development of the Ni-Cr Base Alloys for Dental Prostheses
Mots-clés en anglais
Corrosion.
Dental prostheses
Mechanical characterization
Microstructural characterization
Ni-Cr alloys
Resumé en anglais
This study aimed to develop nickel-chromium base alloys for dental prostheses with the best characteristics for subsequent production and application. Samples were acquired from eight manufacturers of commercial alloys. The materials were characterized in terms of chemical composition, mechanical properties, microstructure, melting temperature, coefficient of thermal expansion, corrosion and biocompatibility. For this, we have used X-ray fluorescence (XRF-WDS), ICP-OES, tensile tests, hardness testing, corrosion testing, evaluation of cytotoxicity, scanning electron microscopy (SEM), electron probe microanalysis (EDS) , X-ray diffraction (XRD), differential thermal analysis (DTA), dilatometry and evaluation of fluidity. Most of the chemical compositional determined in this study were not consistent with the compositions provided by the manufacturers. The results clearly showed the presence of a typical eutectic microstructure formed by Niss and NiBe in alloys containing Be, which can be considered a "fingerprint" of the presence of this element in these alloys. It was possible to verify the formation of intermetallics in the interdendritic region of the Be-free alloys. In one of the alloys this intermetallic was identified as (Nb6Ni16Si7), this alloy presenting a initial melting temperature below the eutectic melting of the Niss+NiB eutectic. Overall, the results of hardness tests showed superior hardness for alloys with Be. One of the commercial alloys was chosen for reproduction in laboratory (LAB) and industrial (IND) scales. The alloys produced showed the same microstructural characteristics, chemical and physical characteristics of the commercial alloy. In the fluidity tests, the LAB alloy showed the same behavior of the commercial alloy. The IND alloy presented yield strength and modulus of elasticity ?e0, 02% = 810MPa, E = 200 MPa, respectively. The corrosion tests showed passive behavior for both commercial and IND alloy in artificial saliva and mouthwash solutions. The cytotoxicity assay indicated that the IND alloy is not cytotoxic in the negative control (Ti plate). The results obtained with the IND alloy indicate the possibility of fabrication this alloy for dental prosthesis on an industrial scale.
 
AVERTISSEMENT - Regarde ce document est soumise à votre acceptation des conditions d'utilisation suivantes:
Ce document est uniquement à des fins privées pour la recherche et l'enseignement. Reproduction à des fins commerciales est interdite. Cette droits couvrent l'ensemble des données sur ce document ainsi que son contenu. Toute utilisation ou de copie de ce document, en totalité ou en partie, doit inclure le nom de l'auteur.
EMD11009.pdf (2.48 Mbytes)
Date de Publication
2013-08-22
 
AVERTISSEMENT: Apprenez ce que sont des œvres dérivées cliquant ici.
Tous droits de la thèse/dissertation appartiennent aux auteurs
CeTI-SC/STI
Bibliothèque Numérique de Thèses et Mémoires de l'USP. Copyright © 2001-2024. Tous droits réservés.