• JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
  • JoomlaWorks Simple Image Rotator
 
  Bookmark and Share
 
 
Master's Dissertation
DOI
https://doi.org/10.11606/D.97.2009.tde-27092012-124045
Document
Author
Full name
Jérika Suely Lamas
Institute/School/College
Knowledge Area
Date of Defense
Published
Lorena, 2009
Supervisor
Committee
Baldan, Carlos Alberto (President)
Ruppert Filho, Ernesto
Shigue, Carlos Yujiro
Title in Portuguese
Projeto e construção de limitador de corrente supercondutor utilizando fitas de YBCO
Keywords in Portuguese
Caracterização de fitas
Fitas BSCCO
Fitas HTS
Fitas YBCO
Limitadores de corrente supercondutores resistivos (FCL)
Abstract in Portuguese
Limitadores de corrente supercondutores resistivos (LCSR) são dispositivos com características elétricas próximas ao ideal quando ocorre a transição do estado supercondutor para o estado normal, limitando a corrente de falta através da inserção rápida de uma resistência na rede. A viabilidade técnica e econômica destes limitadores aumentou após o desenvolvimento dos supercondutores de alta temperatura crítica HTS. A primeira geração de fitas HTS (BSCCO) consiste em multifilamentos de material supercondutor embutidos em uma matriz de prata. A densidade de corrente crítica típica é de aproximadamente 140 A/mm2. Contudo, a resistência alcançada pelo LCSR quando atinge o estado normal não é suficiente para limitar a corrente de falta, sendo necessários longos comprimentos de fitas (~5 km) para que a corrente seja limitada. O recente desenvolvimento de fitas supercondutoras de YBCO com filmes finos texturizados e com substrato de alta resistividade superou o desempenho das fitas de BSCCO para esta aplicação. Com uma densidade de corrente crítica de 136 A/mm2, as fitas de YBCO são bem conhecidas pelo seu alto valor de índice n (aproximadamente 30), rápida resposta de transição após falta e alta resistência elétrica no estado normal. Neste trabalho foram analisados o comportamento elétrico e magnético das fitas de BSCCO e YBCO (em amostras curtas de 0,2 m) utilizando diferentes técnicas de caracterização das propriedades das fitas HTS. A partir destes resultados, medidas com pulsos de corrente DC e AC com intensidades de 3 a 7 vezes a corrente crítica do sistema (I=720 A a 1700 A) com duração de 1 a 5 ciclos da rede em 60 Hz (16 a 80 ms) foram realizados de forma a obter as características do tempo de recuperação em um elemento contendo 4 fitas em paralelo (0,4 m). Os resultados permitiram o projeto, construção e medidas em corrente AC de um protótipo LCSR (Ipico = 2 kA) contendo 16 elementos sob condições normais de operação da rede (220 V - 60 Hz).
Title in English
Project and construction of a fault current limiter using YBCO tapes
Keywords in English
BSCCO tapes
HTS tapes
Superconducting Fault Current Limiter (SFCL)
Tapes characterization
YBCO tapes
Abstract in English
Resistive Superconducting fault current limiter (SFCL) are devices with electrical behavior near the ideal when it changes its state from the superconducting to the normal state, limiting the fault current by the insertion of a fast transition resistance in the grid. The technical and economical feasibility of these limiters arose after the development of the high critical temperature superconductors HTS. First generation HTS tapes (BSCCO) consist of multifilamentary composite tapes embedded in a silver matrix. The typical critical current density is approximately 14 kA/cm2. However, the resistance reached by the SFCL when normal state occurs is not high enough to limit the fault current, making necessary long lengths of tapes (~5 km) for limiting purposes. The recently development of coated conductors composites with high resistivity metal substrate have succeeded the BSCCO tapes which are based on YBCO textured film. Upon carrying a critical current density of 13.6 kA/cm2, YBCO tapes are well known for their high n-index value (approximately 30), fast transition response after fault, and high electrical resistance in the normal state. In this work, we will present the electrical and magnetic performance of BSCCO and YBCO tapes (short samples of 0.2 m) using several techniques to characterize the properties of the HTS tapes. It was also performed analysis with DC and AC currents peaks with strength of 3 to 7 times the critical current (I=720 A to 1700 A) lasting 1 to 5 cycles (16 to 80 ms) in order to verify the recovery characteristics in an element with 4 tapes in a parallel connection. And with those characteristics we designed and constructed and measured in AC current a SFCL prototype (Ipeak = 2 kA) consisting in 16 elements to use in the grid (220 V - 60 Hz) under operational conditions.
 
WARNING - Viewing this document is conditioned on your acceptance of the following terms of use:
This document is only for private use for research and teaching activities. Reproduction for commercial use is forbidden. This rights cover the whole data about this document as well as its contents. Any uses or copies of this document in whole or in part must include the author's name.
EMD09008.pdf (5.99 Mbytes)
Publishing Date
2012-09-27
 
WARNING: Learn what derived works are clicking here.
All rights of the thesis/dissertation are from the authors
CeTI-SC/STI
Digital Library of Theses and Dissertations of USP. Copyright © 2001-2024. All rights reserved.